S. NO |
CATEGORY |
 |
FILM TYPE |
|
THICKNESS (MICRONS) |
PROPERTIES |
APPLICATIONS |
REF.NO. QAD UFLD S/09 |
VIEW APPLICATION |
1 |
Flexible Packaging Films |
|
10,11,12,15, 19,23,36,50 |
| • |
Excellent clarity. The film |
| |
is available in two types, Viz., |
| |
1. Plain (both side untreated (UT)
2. One side Corona treated film (CT), Corona
treatment is available inside or outside of the roll. |
| |
|
|
Flexible packaging, specially designed for FFS machines |
F1/1 |
 |
2 |
Optically clear |
|
12,23,36 |
| • |
This grade of films are |
| |
low haze films with high clarity & transparency. |
| • |
They are available in |
| |
corona treated or untreated form. |
| • |
This film is having all |
| |
desired properties mentioned under F-PAP. |
|
Printing & Lamination Metallization, Embossing Holograms |
F2/1 |
|
3 |
Extra Clear |
|
12,23,30,36,50 |
| • |
This grade of films are |
| |
low haze films with highest clarity & transparency. |
| • |
They are available in |
| |
corona treated or untreated form. |
| • |
This film is having all |
| |
desired properties mentioned under F-PAP. |
| |
|
|
Printing & Lamination Metallization, Embossing Holograms |
F3/1 |
 |
4 |
Coated Films for Conversion (Improved ink adhesion & retort)
|
|
10,12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FPAP. |
| • |
The primer coating done |
| |
on one side of the film provides excellent anchorage to wide range of solvent
and water based inks & adhesives hence increases the
bond strength of laminate and the other side is plain
polyester . |
| |
|
|
This grade of film is used for flexible packaging, specially Designed for FFS machines.The film is suitable for hot fill applications, pasteurization, sterilization or retort. |
F4/1 |
 |
5 |
|
10,12,23 |
| • |
This grade of film is |
| |
used for flexible packaging, specially Designed for FFS machines. One side is coated for better ink anchorage with various inks and adhesinves. |
| • |
This film is simillar to |
| |
F-AUU film with corona treatment on the other side for improved bond strength with the outer substrate. |
|
This grade of film is used for flexible
packaging, specially Designed for FFS
machines. The film is suitable for hot fill
applications, pasteurization, sterilization
or retort. |
F5/1 |
 |
6 |
|
10,12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FPAP. |
| • |
The primer coating done |
| |
on one side of the film provides better
anchorage to inks & adhesives and
improves metal adhesion.The film is
suitable for pasteurization applications. |
| |
|
|
Flexible printing and packaging, specially Designed for FFS machines. The film can be used for hot fill applications. |
F6/1 |
 |
7 |
|
9,10,12,23 |
| • |
This is similar to F-ATU |
| |
film with corona treatment on the other side for improved bond strength with the other substrate. |
| • |
The film is suitable for |
| |
pasteurization applications. |
|
Flexible printing and packaging,
specially Designed for FFS machines.
The film can be used for hot fill
applications. |
F7/1 |
 |
8 |
|
10,12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FPAP. |
| • |
The coating done on one |
| |
side of the film
provides excellent anchorage of metal, various inks & adhesives. |
| |
|
|
Flexible Printing and packaging,
metallizing and designed for FFS
machines. The film is not recommended
for hot fill applications, pasteurization,
sterilization or retort. |
F8/1 |
 |
9 |
|
10,12,15,19, 23 |
| • |
This is similar to F-CHE |
| |
film with corona treatment on the other side for improved bond strength with the other substrate. |
|
Flexible Printing and packaging,
metallizing and designed for FFS
machines. The film is not recommended
for hot fill applications, pasteurization,
sterilization or retort. |
F9/1 |
 |
10 |
Coated Optically clear Films for Conversion
(Improved ink adhesion & retort) |
|
12,23,36 |
| • |
This grade of film having |
| |
high clarity & transparency. |
| • |
The chemical coating done |
| |
on one side of the film provides
wide range of solvent and water based inks & adhesives &
metal.The other side is plain / corona polyester. |
|
Flexible Printing & Packaging, Metallizing and designed for FFS machines.This film is not
recommended for hot fill applications Pasteurization, Sterlization and Retort. |
F10/1 |
|
11 |
|
12,23,36 |
| • |
F-CLR-A is having high |
| |
clarity & transparency with one
side primer coated as F-AUU and F-CLR-A1 is the same
film with other side corona. |
|
Flexible Printing & Packaging, Pasteurization, Sterillization, and Retort applications. |
F11/1 |
|
12 |
|
12,23,36 |
| • |
F-CLR-T is having high |
| |
clarity & transparency with one
side primer coated as F-ATU and F-CLR-T1 is the same
film with other side corona. |
| |
|
|
Flexible Printing and Packaging and
also applicable for hot fill applications. |
F12/1 |
|
13 |
Coated Extra clear films for Conversion (Improved ink adhesion & retort) |
|
12,23,36 |
| • |
This grade of film having |
| |
ultra high clear appearance. |
| • |
The chemical coating |
| |
done on one side of the film provides
wide range of solvent and water based inks & adhesives &
metal.The other side is plain / corona polyester. |
|
Flexible Printing & Packaging, Metallizing and designed for FFS machines. This film is not recommended for hot fill applications Pasteurization, Sterlization and Retort. |
F13/1 |
|
14 |
|
12,23,36 |
| • |
F-XLR-A is having ultra |
| |
high clear appearance with one
side primer coated as F-AUU and F-XLR-A1 is the same
film with other side corona. |
| |
|
|
Flexible Printing & Packaging, Pasteurization, Sterillization, and Retort applications. |
F14/1 |
|
15 |
|
12,23,36 |
| • |
F-XLR-T is having ultra |
| |
high clear appearance with one
side primer coated as F-ATU and F-XLR-T1 is the same
film with othe side corona. |
| |
|
|
Flexible Printing and Packaging and also applicable for hot fill applications. |
F15/1 |
|
16 |
Document Lamination |
|
10,11,12,15, 19,23,36,50 |
| • |
It has balance |
| |
shrinkage |
|
This grade of film is used for thermal lamination such as document lamination. |
F16/1 |
 |
17 |
Matt film |
|
12,19,23 |
| • |
This grade of film contain |
| |
a special additive to give matt surface |
| |
|
| |
|
|
Board lamination, thermal lamination, label & conversion applications |
F17/1 |
 |
18 |
Coated Matt Film |
|
12,19,23 |
| • |
One side chemical |
| |
coated matt film for
improved ink adhesion & laminate
bond strength. |
| |
|
|
Board lamination, thermal lamination,
label & conversion applications |
F18/1 |
|
19 |
Electrical Grade |
|
12,15,19,23, 36,50 |
| • |
This grade of film is |
| |
having excellent dielectric properties such as high breakdown voltage, low dielectric Loss factor & high electrical resistivity. |
| |
|
|
This grade of film is used in electrical insulation such as motor winding, cable overwraps, leatheroid lamination, electrical insulation tape. |
F19/1 |
 |
20 |
Adhesive tape film |
|
19,23,36,50 |
| • |
Specially designed to |
| |
meet Stringent requirement of adhesive coating |
| |
|
|
Adhesive tape |
F20/1 |
 |
21 |
Yarn grade |
|
12,23 |
| • |
This grade of film is |
| |
having Excellent clarity, transparency & thermal stability at elevated temperatures (190°C) makes this product ideal for metallic yarn processsing. |
| • |
Because of excellent |
| |
clarity & transparency, when this film is metallized & coated with colored laquer, it gives good luster to the end product. |
|
Metallic yarn (can be directly used for plain yarn) & also can be used as synthetic jari (yarn) after metallization & lacquering. |
F21/1 |
 |
22 |
Hot Stamping Grade |
|
12,15,19,23, 45,50,55 |
| • |
This grade of film has |
| |
excellent transparency & clarity. |
| • |
It has good thermal |
| |
stability at elevated temperature (190°C) |
|
This grade of film is ideal as a transfer foil to transfer the design either on paper, textiles or plastics. |
F22/1 |
 |
23 |
Lidding film |
|
12,23,36 |
| • |
It has Improved tensile |
| |
strength and elongation properties |
|
This grade of film is used for Lidding application in Dairy products |
F23/1 |
 |
24 |
Metallizing grade |
|
10,11,12,15, 19,23,36,50 |
| • |
This is a transparent film |
| |
with excellent clarity to give good gloss after metallization. |
| • |
The film is available in |
| |
two types, viz.,
1.Plain (both side untreated (UT)
2.One side Corona treated film (CT), the metallization on the corona treated side gives good adhesion. |
|
This grade of film is used in vacuum
metallization & for further usage in
flexible packaging as a barrier
substrate. |
F24/1 |
 |
25 |
White opaque packaging film |
|
23,26,50 |
| • |
F-WAP is a white |
| |
polyester film with exellent opacity. |
| • |
Film has a wide range of |
| |
applications due to its excellent combination of optical, physical, mechanical and thermal properties. |
|
This film is suitable for jobs where
white backing is required like lids,
labels etc.mostly surface printed jobs |
F25/1 |
 |
26 |
White opaque chemically coated film |
|
23,36,50 |
| • |
This grade is a white |
| |
polyester film with exellent opacity. |
| • |
The film is one side |
| |
chemically treated for better ink
anchorage to solvent based inks. |
|
This film is suitable for jobs where
white backing is required like lids,
labels etc.mostly surface printed jobs |
F26/1 |
 |
27 |
Easy stackale film |
|
12 |
| • |
This grade have special |
| |
functional
surface so as to provide easy stacking
of bags and restrict the slipage while
stacking. |
| |
|
| |
|
|
This film helps during
palletizing,storage and stacking of
bags in supermarket. |
F27/1 |
 |
28 |
Heat Seal film |
|
15,23,30,36 |
| • |
This grade of film is a |
| |
co-extruded
polyester film having one side heat
sealable layer. |
| |
|
| |
|
|
This film is suitable for seal to itself as
well as APET/CPET trays. Heat seal
side also seals with PVDC and PVC. |
F28/1 |
 |
29 |
Co-extruded film for improved adhesion |
|
12,15 |
| • |
This grade of film is a |
| |
co-extruded
polyester film having one side special
functional layer which shows excellent
adhesion to solvent inks and provide
excellent metaladhesion. |
| |
|
| |
|
|
This film is applicable for printing,
lamination, and metallization. |
F29/1 |
|
30 |
Direct Embossable grade |
|
13 |
| • |
This film is designed |
| |
with a special surface suitable for
direct embossing without any offline coating and providing
deep & sharp impression. |
| • |
The film is available with |
| |
untreated and corona treated on other side. |
| |
|
|
Holographic Packaging, giftwrap,
embossing & hologram. |
F30/1 |
|
|
